藕节炒炭工艺

刘善新; 靳光乾

您当前的位置：

首页 >

文章列表页 >

藕节炒炭工艺

更新时间：2024-09-23

- 藕节炒炭工艺
- Technological Conditions of Carbonizing Process of
- 中国实验方剂学杂志 2010年16卷第5期页码：7-10
- 作者机构：
- 作者简介：
- 基金信息：
  
  国家十一五科技支撑项目(2006BAI09B006-02)
- DOI：
  中图分类号：
- 纸质出版日期：2010
- 稿件说明：
移动端阅览
刘善新, 靳光乾. 藕节炒炭工艺[J]. 中国实验方剂学杂志, 2010,16(5):7-10.

LIU Shan-xin, JIN Guang-qian. Technological Conditions of Carbonizing Process of [J]. Chinese journal of experimental traditional medical formulae, 2010, 16(5): 7-10.
刘善新, 靳光乾. 藕节炒炭工艺[J]. 中国实验方剂学杂志, 2010,16(5):7-10. DOI：

LIU Shan-xin, JIN Guang-qian. Technological Conditions of Carbonizing Process of [J]. Chinese journal of experimental traditional medical formulae, 2010, 16(5): 7-10. DOI：

摘要

目的 :研究藕节炒炭工艺条件。方法 :采用正交试验

以藕节炭中总多酚、水溶性浸出物的含量为指标

结合成品性状

对藕节炒炭的工艺条件进行优选

并进行中试实验。结果 :小试优选藕节炒炭投料300 g

投料温度200 ℃、炒制时间22 min。中试炒炭投料10 kg

炒筒转速26 r/min

炒筒温度预设下限195 ℃

上限205 ℃

炒制时间约10 min。结论 :小试炒炭的工艺条件与中试有差异。

Abstract

Technological conditions of carbonizing process of Nodus Nelumbinis Rhizomatis were selected by orthogonal test according to the contents of total polyphenol and water soluble extract combined with the characteristics of finished products. Pilot experiments conditions of the carbonizing process of Nodus Nelumbinis Rhizomatis were studied by using CG-Y7502 intellectualized herbal medicine roaster manufactured by Chun Jiang Institute of Automation. Result: Temperature for charring Nodus Nelumbinis Rhizomatis was 200 ℃ for 22 minutes in laboratory when the weight of Nodus Nelumbinis Rhizomatis is 300 g. The weight of Nodus Nelumbinis Rhizomatis was 10 kg for 10 minutes at the speed of 26r/min

temperature ranging from 195 ℃ to 205 ℃.

关键词

Keywords

references

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

藕节炒炭工艺

水蒲桃种子总多酚提取工艺的响应曲面法优化

正交试验法优选熟地炭的炮制工艺

星点设计-效应面法优选蜜糠炒白术的炮制工艺