响应面法优化鹰嘴豆铁蛋白提取工艺

辛敏; 黄昀; 詹欣; 王然; 唐劲天

doi:10.13422/j.cnki.syfjx.2014140012

您当前的位置：

首页 >

文章列表页 >

响应面法优化鹰嘴豆铁蛋白提取工艺

工艺与制剂 | 更新时间：2024-01-04

- 响应面法优化鹰嘴豆铁蛋白提取工艺
- Optimization of Extraction Process of Ferritin from by Response Surface Methodology
- 中国实验方剂学杂志 2014年20卷第14期页码：12-16
- 作者机构：
- 作者简介：
- 基金信息：
  
  国家自然科学基金青年基金项目（81102889）
- DOI：10.13422/j.cnki.syfjx.2014140012
  中图分类号： TQ461;R284.2
- 纸质出版日期：2014
- 稿件说明：
移动端阅览
辛敏, 黄昀, 詹欣, 等. 响应面法优化鹰嘴豆铁蛋白提取工艺[J]. 中国实验方剂学杂志, 2014,20(14):12-16.

XIN Min, HUANG Yun, ZHAN Xin, et al. Optimization of Extraction Process of Ferritin from by Response Surface Methodology[J]. Chinese journal of experimental traditional medical formulae, 2014, 20(14): 12-16.
辛敏, 黄昀, 詹欣, 等. 响应面法优化鹰嘴豆铁蛋白提取工艺[J]. 中国实验方剂学杂志, 2014,20(14):12-16. DOI： 10.13422/j.cnki.syfjx.2014140012.

XIN Min, HUANG Yun, ZHAN Xin, et al. Optimization of Extraction Process of Ferritin from by Response Surface Methodology[J]. Chinese journal of experimental traditional medical formulae, 2014, 20(14): 12-16. DOI： 10.13422/j.cnki.syfjx.2014140012.

摘要

目的：优选鹰嘴豆铁蛋白的提取工艺。方法：在单因素试验基础上，选择缓冲液pH、料液比、盐析盐摩尔浓度为自变量，干膏量及铁蛋白、总蛋白得率为响应值，根据Box-Behnken原理采用三因素三水平响应面分析法优选鹰嘴豆铁蛋白的提取工艺参数。结果：最佳提取工艺条件为缓冲液pH 7.46，料液比1：4，盐析盐摩尔浓度50 mmol·L-1；铁蛋白得率0.002 556%，与理论预测值0.002 633%偏差较小。结论：采用响应面法优选的鹰嘴豆铁蛋白提取工艺稳定合理，为提高铁蛋白得率和植物补铁制剂的开发利用提供参考。

Abstract

Objective: To optimize extraction process of ferritin from Cicer arietinum. Method: On the basis of single factor tests

response surface methodology(RSM) was applied for optimizing extraction conditions with solid-liquid ratio

buffer pH

salt concentration as independent variables and yields of ferritin and total proteins

dry weight of extract as response value.According to Box-Behnken principles

RSM with three factors and three levels was used. Result: Optimum extraction conditions for ferritin from C. arietinum was as follows:buffer pH of 7.46

solid-liquid ratio of 1:4

molar concentration of MgCl2 50 mmol·L-1;yield of ferritin was 0.002 556%

whose deviation was small with theoretical predicted value of 0.002 633%. Conclusion: RSM for optimizing extraction process of ferritin was stable and feasible

it could improve extraction conditions of ferritin and provide a reference for development and utilization of plant iron supplements.

关键词

Keywords

references

浏览量

160

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

响应面分析法优化湿法超微粉碎地龙蛋白的提取工艺

响应面法优化黄芩中黄芩苷的电磁裂解提取工艺

正交试验法优选补肾益髓颗粒提取工艺

葛参丸提取和干燥工艺研究

紫锥菊中菊苣酸的提取工艺和含量测定